• USA Forks Toothbar mounted on a skid steer bucket
  • A closeup of the USA Forks Toothbar mounted to a tractor bucket

Clamp-on Tooth Bar (Medium)

Fits Bucket Sizes 49.5

If you need to dig through hardened soil, rocks, gravel, mud or clay, you will need a tooth bar with bucket teeth. The design of our unique, proprietary, Clamp-on tooth bars clamps right onto the welded on cutting edge of the tractor or skid steer bucket. No drilling, no welding, no chains or binders required. On and off in seconds. You can even move it from bucket to bucket.

IMPORTANT –  Measure the inside of your bucket from side to side. Then find and order the tooth bar will allow at least ¼” clearance on each side of the tooth bar to fit inside the bucket. You can have as much as 2” – 3” on each side as clearance, but the closer and tighter the fit the better.

*These clamp on tooth bars will NOT fit over bolted on cutting edges or edges thicker than ¾”.

Clear
Quantity
SKU: 0060-28-50 Category:

Description

If you need to dig through hardened soil, rocks, gravel, mud or clay, you will need a tooth bar with bucket teeth. The design of our unique, proprietary, Clamp-on tooth bars clamps right onto the welded on cutting edge of the tractor or skid steer bucket. No drilling, no welding, no chains or binders required. On and off in seconds. You can even move it from bucket to bucket.

Each of our hardened bucket teeth is bolted on the tooth bar and is easily replaced. A broken welded on bucket tooth will become a pain to repair or replace. If you do happen to break or damage one of our bucket teeth, it is covered under our Ltd Lifetime Warranty.*

The tip of each bucket tooth is made from hardened steel and is easily and inexpensively replaced after normal wear and tear.

To make sure it fits, installs and works properly on your tractor or skid steer loader bucket. Measure the inside of your bucket from left side to right side. Then find and order the tooth bar will allow at least ¼” clearance on each side of the tooth bar to fit inside the bucket. You can have as much as 2” – 3” on each side as clearance, but the closer and tighter the fit the better.

*These clamp on tooth bars will NOT fit over bolted on cutting edges or edges thicker than ¾”.

Toothbar Demo


Video embedding powered by Webilop

Additional information

WeightN/A
DimensionsN/A
Tooth Bar Size

49.5" Tooth Bar with 7 Bucket Teeth, 52.5" Tooth Bar with 7 Bucket Teeth, 55.5" Tooth Bar with 7 Bucket Teeth

Reviews

There are no reviews yet.

Be the first to review “Clamp-on Tooth Bar (Medium)”

You may also like…